Rahmat Tri Basuki, Uly Amrina
DOI:
https://doi.org/10.35261/gijtsi.v3i02.6942Abstract
PT Bumimulia Indah Lestari found defects in the oil bottle packaging products it produces, which include perforated bottles, black spots on bottles, and defects on labels. The type of defect on the bottle label is the highest defect in the period from July to December 2021 compared to other defects. This research is focused on the problem of defects in the inverted label as the dominant defect of the entire defect label. Researchers use the DMAIC method to solve these problems. The improvement resulting from the DMAIC method is the manufacture of a jig tool called Jig Go No Go which aims to reduce the number of defects and increase productivity in bottle products. The implementation of the jig can reduce the defect label as a whole from 5.8% to 3.3% and the sigma value increases from 2.488 to 2.493.
Downloads
References
H. Chaniago, “Analisis kualitas pelayanan, kualitas produk, dan harga pada loyalitas konsumen nano store,” Int. J. Adm. Bus. Organ., vol. 1, no. 2, pp. 59–69, 2020.
M. S. Arianti, E. Rahmawati, and R. R. Y. Prihatiningrum, “Analisis pengendalian kualitas produk dengan menggunakan statistical quality control (SQC) pada usaha amplang karya bahari di Samarinda,” J. Bisnis dan Pembang., vol. 9, no. 2, pp. 1–13, 2020.
H. Murdifin and N. Mahfud, Manajemen Produksi Modern Operasi Manufaktur dan Jasa. Jakarta: Bumi Aksara, 2007.
U. Amrina and H. Firmansyah, “Analysis of Defect and Quality Improvement for O Ring Product Through Applying DMAIC Methodology,” Penelit. dan Apl. Sist. dan Tek. Ind., vol. 13, no. 2, pp. 136–148, 2019.
A. R. Heryadi and W. Sutopo, “Review pemanfaatan Metodologi DMAIC analysis di industri garmen,” 2018.
O. Yemima, D. A. Nohe, and Y. N. Nasution, “Penerapan Peta Kendali Demerit dan Diagram Pareto Pada Pengontrolan Kualitas Produksi (Studi Kasus: Produksi Botol Sosro di PT. X Surabaya),” J. EKSPONENSIAL, vol. 5, no. 2, pp. 197–202, 2014.
E. Muslimah and T. Keriswanto, “Pengendalian Kualitas Kain Denim DT 650 pada Departemen Weaving Menggunakan P-chart,” in Prosiding Simposium Nasional RAPI X1V- 2015FT UM, 2015, pp. I-167-I–171.
M. Sya’roni and H. Suliantoro, “Analisis Pengurangan Defect Produksi Dengan Menggunakan Metode Six Sigma Pada Unit Painting Smartphone Merk Polytron (Studi Kasus pada PT. Hartono Istana Teknologi Kudus),” Ind. Eng. Online J., vol. 7, no. 4, 2019.
M. A. Adha, A. Supriyanto, and A. Timan, “Strategi peningkatan mutu lulusan madrasah menggunakan diagram fishbone,” Tarbawi J. Keilmuan Manaj. Pendidik., vol. 5, no. 01, pp. 11–22, 2019.
P. Y. Dharayanti, M. Sumantri, and I. W. Widiana, “Pengaruh Model Pembelajaran Learning Cycle 5E Berbasis Brainstorming Terhadap Kemampuan Berpikir Divergen Bahasa Indonesia Siswa SD,” Mimb. PGSD Undiksha, vol. 1, no. 1, 2013.
M. Muchid, “Desain 3d Kemasan Minyak Wangi Aplikasi CAD (Computered Aided Design) dengan Metode API (Analysis Product Inspection),” J. INSTEK (Informatika Sains dan Teknol., vol. 6, no. 1, pp. 94–101, 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Rahmat Tri Basuki, Uly Amrina
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
