Perbandingan Biaya Distribusi Produk Cat Menggunakan Model Transportasi Metode Vogel’s Approximation Method dan Least Cost

Fyoni Erza; Fahriza Nurul Azizah

doi:10.35261/gijtsi.v4i01.8791

Authors

Fyoni Erza Program Studi Teknik Industri, Universitas Singaperbangsa Karawang
Fahriza Nurul Azizah Program Studi Teknik Industri, Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.35261/gijtsi.v4i01.8791

Abstract

This research was conducted at PT Victorindo Kimiatama, a company that distributes paint and coating products in the Jabodetabek area and its surroundings where this company does not yet have a permanent distribution cost optimization calculation technique that can result in increased distribution costs. This study aims to determine efficient distribution channels and minimize distribution costs. The distribution cost calculation applies the transportation model by comparing the VAM and least cost methods. The calculation results show that there is a difference in the total cost of distribution where the VAM method produces a cost of Rp. 795,161.21 while the least cost method is Rp. 735,824.48, so that by using the least cost method the company can save distribution costs of Rp. 747,300.52 or 0.49% of the previous distribution fee

Downloads

Download data is not yet available.

References

P. Subagyo, Dasar-Dasar Operations Research, vol. 2. Yogyakarta: BPFE Yogyakarta, 2005.

Rosmita, M. A. Putri, and Rosmayani, “Analisis Faktor-Faktor yang Mempengaruhi Saluran Distribusi Usaha Kecil Menengah (UKM) (Survei Pada Kue Bangkit ‘Syempana’ Di Kota Pekanbaru),” J. Valuta, vol. 4, no. 2502–1419, pp. 116–137, 2018.

F. Tjiptono, C. G, and A. D, Pemasaran Strategi. Yogyakarta: Andi Yogyakarta, 2008.

J. O. Muladi, K. Kristiansyah Dezzano, A. Febrianto, A. C. Kurniawan, N. Ruswandi, and A. A. N. P. Redi, “Optimasi Rute Kapal untuk Distribusi Spare Parts Menggunakan Vehicle Routing Problem dengan Algoritma Tabu Search,” Go-Integratif J. Tek. Sist. dan Ind., vol. 1, no. 01, pp. 1–10, 2020, doi: 10.35261/gijtsi.v1i01.4316.

T. P. H. Atmoko, “Strategi Pemasaran Untuk Meningkatkan Volume Penjualan Di Cavinton Hotel Yogyakarta,” J. Indones. Tour. Hosp. Recreat., vol. 1, no. 2, pp. 83–96, 2018, doi: 10.17509/jithor.v1i2.13769.

Mujiono, E. J. S., and Sujianto, “Optimalisasi Biaya Transportasi pada Industri Manufaktur,” Ind. Inov., vol. 9, no. 2615–3866, pp. 27–30, 2019.

L. Pečený, P. Meško, R. Kampf, and J. Gašparík, “Optimisation in Transport and Logistic Processes,” Transp. Res. Procedia, vol. 44, pp. 15–22, 2020, doi: 10.1016/J.TRPRO.2020.02.003.

S. Regia, R. Awaluddin, and A. Ahmad Yusuf, “Optimization of Distribution Cost (a Case study in PT. Zamrud Bumi Indonesia),” J. Agri Socio Econ. Bus., vol. 3, no. 2, pp. 69–80, 2021, doi: 10.31186/jaseb.3.2.69-80.

F. Zulfikarijah, Operation Research. Malang: Bayumedia, 2004.

N. Dimasuharto, A. M. Subagyo, and R. Fitriani, “Optimalisasi Biaya Pendistribusian Produk Kaca Menggunakan Model Transportasi Dan Metode Stepping Stone,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 7, no. 2, pp. 81–88, 2021, doi: http://dx.doi.org/10.30656/intech.v7i2.3513.

J. Heizer and R. Barry, Operations Management. Jakarta: Salemba Empat, 2005.

S. Basriati, R. Andriati, and E. Safitri, “Penyelesaian Model Transshipment dengan Metode Least Cost, North West Corner dan vogel’s Approximation Method (Studi Kasus: PT. Subur Bangun Transport),” Fak. Sains dan Teknol., vol. 1, no. November, pp. 726–733, 2018.