A FORECASTING ANALYSIS OF CAR WHEEL RIM DEMAND AT PT. XX TO REDUCE WASTE USING POM-QM SOFTWARE

Aditya Paramitha; Joumil Aidil Saifuddin Z.S

doi:10.35261/barometer.v8i2.7702

Penulis

Aditya Paramitha UPN "Veteran" Jawa Timur
Joumil Aidil Saifuddin Z.S Program Studi Teknik Industri, Fakultas Teknik Universitas Pembangunan Nasional “Veteran” Jawa Timur

DOI:

https://doi.org/10.35261/barometer.v8i2.7702

Abstrak

PT. XX is one of the car wheel rim companies in Indonesia whose products are sent to a number of local and international assembly companies. The main goal of this research is to forecast the demand for car wheel rim production using three forecasting methods at PT. XX. The research results are in the form of the value of demand forecasting calculation along with the error rate. It is known that there are three methods used, namely Single Moving Average, Weighted Moving Average, and Single Exponential Smoothing methods. Based on calculations from the POM-QM software, the method that is suitable to be applied in this research is the Weighted Moving Average method because the smallest error value is obtained as in the MAPE error value is 12.124%, the Mean error value is 1177.773 the MAD error value is 24587.23, the MSE error value is 1099377000, and the forecast value in the next period is 243013 units. Through this research and forecasting, the writer hoped that PT. XX could consider it a plan for the next batch of production.

Unduhan

Data unduhan belum tersedia.

Referensi

A. S. Wijianto, Mulyadi, and Iswanto, “Simulasi Numerik Velg After Market Untuk Mendapatkan Nilai Tegangan dan Deformasi Maksimum,” J. Rekayasa Energi Manufaktur, vol. 7, no. 2, pp. 23–28, 2022, doi: http://doi.org/10.21070/rem.v7i2.1568.

S. Usmangani, M. Kale, and K. Laxman, “manufacturing Planning of EV Wheel Rim,” Int. Res. J. Mod. Eng. Technol. Sci., vol. 03, no. 08, pp. 1034–1045, 2021.

V. Maghfiroh, Y. Amrozi, Q. B. Prakoso, and M. A. Aliansyah, “Analisis Model Manajemen Permintaan Scm Network Dan Peramalan Permintaan Pada Penjualan Busana Muslim Menggunakan Metode Linear Regression,” METHOMIKA J. Manaj. Inform. dan Komputerisasi Akunt., vol. 5, no. 1, pp. 28–32, 2021, doi: 10.46880/jmika.vol5no1.pp28-32.

J.-S. J. Song, Z. Xue, and X. Shen, “Demand Management and Inventory Control for Substitutable Products,” SSRN Electron. J., 2021, doi: 10.2139/ssrn.3866775.

H. Q. Karima, M. Aji, and F. Romadlon, “Analisis Kapasitas Produksi dan Pemenuhan Permintaan dengan Model Sistem Dinamis pada Industri Semen,” Pendidik. dan Softw. Ind., vol. 9, no. 1, pp. 11–18, 2022.

S. Shofiyah et al., “Pengelolaan Permintaan dan Kapasitas Produksi pada UMKM Sektor Jasa di Kota Batam,” J. Ilm. Manaj. dan Kewirausahaan, vol. 2, no. 2, pp. 375–382, 2022, doi: 10.54082/jupin.88.

L. Sucipto and S. Syaharuddin, “Konstruksi forecasting system multi-model untuk pemodelan matematika pada peramalan indeks pembangunan manusia provinsi nusa tenggara barat,” Regist. J. Ilm. Teknol. Sist. Inf., vol. 4, no. 2, pp. 114–124, 2018, doi: 10.26594/register.v4i2.1263.

P. Al Zukri, S. N. Widyaningrum, and Q. Aini, “Forecasting Permintaan Pompa Air Dangkal SHimizu Menggunakan Metode Time Series,” Sist. J. Sist. Inf., vol. 9, no. 2, pp. 226–234, 2020.

P. R. Hakim and H. Prastawa, “FORECASTING DEMAND &USULAN SAFETY STOCK PASIR SILIKA DENGAN METODE TIME SERIES PADA PT SOLUSI BANGUN INDONESIA Tbk. PABRIK …,” Ind. Eng. Online J., vol. 11, no. 4, 2022, [Online]. Available: https://prosiding.seminar-id.com/index.php/sainteks.

Ri. Yudaruddin, Forecasting Untuk Kegiatan Ekonomi dan Bisnis. RV Pustaka Horizon, 2019.

W. B. Ruamiana, J. Nangi, and L. M. Tajidun, “Aplikasi Forecasting Jumlah Frekuensi Penumpang Pesawat Terbang Lion Air Pada Bandar Udara Halu Oleo Dengan Menggunakan Metode Least Square,” semanTIK, vol. 4, no. 1, pp. 151–160, 2018, [Online]. Available: http://ojs.uho.ac.id/index.php/semantik/article/view/4468.

M. S. Putra and I. Solikin, “Aplikasi Peramalan Stok Alat Tulis Kantor (Atk) Menggunakan Metode Single Moving Average (SMA)Pada Pt. Sinar Kencana Multi Lestari,” CESS (Journal Comput. Eng. Syst. Sci., vol. 4, no. 2, pp. 236–241, 2019.

M. H. Lubis, D. Martina, and A. A. Tanjung, “Prediksi permintaan Ayam Pedaging Broiler dengan Single Moving Average,” J. Teknol. Komput. dan Sist. Inf., vol. 2, no. 1, pp. 16–22, 2022, doi: 10.15797/concom.2019..23.009.

E. Tjandra, S. Limanto, and Liliana, “Modified Moving Average (MoMoA) Untuk Peramalan Penjualan Dengan Studi Kasus Sistem Retail,” Teknika, vol. 10, no. 1, pp. 27–36, 2021, doi: 10.34148/teknika.v10i1.310.

M. W. Rini and N. Ananda, “Perbandingan Metode Peramalan Menggunakan Model Time Series,” J. Ilm. Tek. Ind. dan Inf., vol. 10, no. 2, pp. 88–101, 2022, [Online]. Available: https://doi.org/10.31001/tekinfo.v10i2.1419.

R. Sutjiadi and P. Santoso, “Sistem Informasi Inventori dan Optimasi Pengiriman Stok Produk Menggunakan Metode Weighted Moving Average,” Smatika J., vol. 10, no. 02, pp. 64–70, 2020, doi: 10.32664/smatika.v10i02.481.

V. W. Nirmala, D. Harjadi, and R. Awaluddin, “Sales Forecasting by Using Exponential Smoothing Method and Trend Method to Optimize Product Sales in PT. Zamrud Bumi Indonesia During the Covid-19 Pandemic,” Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 4, pp. 59–64, 2021, doi: 10.52088/ijesty.v1i4.169.

F. Sukmana, N. F. Saragih, and I. S. Simamora, “Prediksi Biaya Perbaikan Kendaraan Perusahaan Dengan Menggunakan Metode Single Exponential Smoothing Berbasis Web,” METHOSISFO J. Ilm. Sist. Inf. e-ISSN, vol. 2, no. 2, pp. 12–18, 2022.

R. Badi’ah, E. maya Odelia, and R. Effendi, “Forecasting National People’s Salt Production with Time Series Model Using POM-QM for Windows,” J. Ilm. Poli Bisnis, vol. 14, no. 2, pp. 191–206, 2022.

M. S. Rumetna, T. N. Lina, T. P. Sari, P. Mugu, A. Assem, and R. Sianturi, “Optimasi Jumlah Produksi Roti Menggunakan Program Linear Dan Software Pom-Qm,” Comput. Based Inf. Syst. J., vol. 9, no. 1, pp. 42–49, 2021, doi: 10.33884/cbis.v9i1.3645.

F. Pulansari and I. Nugraha, “Optimasi Biaya Distribusi Perusahaan Pestisida Dengan Kombinasi Metode Transportasi North West Corner Method Dan Modified Distribution Method Berbasis Pom-Qm,” Waluyo Jatmiko Proceeding, vol. 15, no. 1, pp. 198–204, 2022, doi: 10.33005/waluyojatmiko.v15i1.44.

E. B. Kurniawan and N. L. P. Hariastuti, “Implementasi Lean Manufacturing pada Proses Produksi untuk Mengurangi Waste Guna Lebih Efektif dan Efisien,” J. Senopati, vol. 1, no. 2, pp. 85–95, 2020, [Online]. Available: https://doi.org/10.1016/j.jnc.2020.125798%0Ahttps://doi.org/10.1016/j.smr.2020.02.002%0Ahttp://www.ncbi.nlm.nih.gov/pubmed/810049%0Ahttp://doi.wiley.com/10.1002/anie.197505391%0Ahttp://www.sciencedirect.com/science/article/pii/B9780857090409500205%0Ahttp:

F. A. Cahya and W. Handayani, “Minimasi Waste Melalui Pendekatan Lean Manufacturing pada Proses Produksi di UMKM Nafa Cahya,” Al-Kharaj J. Ekon. Keuang. Bisnis Syariah, vol. 4, no. 4, pp. 1199–1208, 2022, doi: 10.47467/alkharaj.v4i4.904.

F. Gunadi and S. R. Widianto, “Perbandingan Data Warehouse Cloud Computing Menggunakan Konvensional Berbasis Kriptografi,” Semin. Nas. Teknol. Komput. Sains, pp. 69–73, 2020, [Online]. Available: https://prosiding.seminar-id.com/index.php/sainteks.

B. Alouffi, M. Hasnain, A. Alharbi, W. Alosaimi, H. Alyami, and M. Ayaz, “A Systematic Literature Review on Cloud Computing Security: Threats and Mitigation Strategies,” IEEE Access, vol. 9, pp. 57792–57807, 2021, doi: 10.1109/ACCESS.2021.3073203.

P. Modisane and O. Jokonya, “Evaluating the benefits of Cloud Computing in Small, Medium and Micro-sized Enterprises (SMMEs),” Procedia Comput. Sci., vol. 181, pp. 784–792, 2021, doi: 10.1016/j.procs.2021.01.231.

I. Permatahati and Muqorobin, “Computer Sales Forecasting System Application Using Web-Based Single Moving Average Method,” Int. J. Comput. Inf. Syst., vol. 3, no. 2, pp. 56–63, 2022, doi: 10.29040/ijcis.v3i2.68.

A. Fitri, R. Yesputra, and A. Nasution, “Pendekatan Metode Weighted Moving Average Untuk Meramal Jumlah Penjualan Keripik,” Indones. J. Comput. Sci., vol. 11, no. 1, pp. 566–576, 2022.

R. Adrianto and M. D. Jyoti, “Analsis Peramalan Penjualan Tepung Tapioka di CV. XYZ Lampung,” Maj. TEGI, vol. 12, no. 2, pp. 40–46, 2020, doi: 10.46559/tegi.v12i2.6203.

A. Purwanto, M. Asbari, and T. I. Santoso, “Analisis Data Penelitian Marketing: Perbandingan Hasil antara Amos, SmartPLS, WarpPLS, dan SPSS untuk Jumlah Sampel Besar,” J. Ind. Eng. Manag. Res., vol. 2, no. 4, pp. 216–227, 2021